Specifications - SMC Networks EZ Connect SMC2632W User Manual

CE Mark Declaration of Conformance
This is to certify that this product complies with ISO/IEC Guide 22
and EN45014. It conforms to the following specifications:
EMC: EN55022(1988)/CISPR-22(1985)
IEC 61000-4-2(2000)
IEC 61000-4-3(2000)
IEC 61000-4-4(2000)
IEC 61000-4-6(2000)
IEC 61000-4-11(2000)
This product complies with the requirements of the Low Voltage
Directive 73/23/EEC and the EMC Directive 89/336/EEC, and carries
the CE Mark accordingly.

Specifications

Functional Criteria
Data Rate 1, 2, 5.5, 11 Mbps
Transmission Mode Half duplex
Network Connection IEEE 802.11b - wireless
Operating Range Up to 100 ft (30m) at 11 Mbps
Up to 1500 ft (450m) at 5.5 Mbps
and lower
Interrupt INTA
Radio Signal
Signal Type Direct Sequence Spread-Spectrum
(DSSS)
Operating Frequency USA, Canada and Europe (ETSI):
2.400-2.4835 GHz,
Japan: 2.400-2.497 GHz
Sensitivity 1, 2, 5.5 Mbps: -80 dBm,
11 Mbps: -76 dBm (typical)
Modulation CCK, BPSK, QPSK
Transmission Power +13 dBm minimum
Class B
4kVCD,
8kVAD
3V/m
1kV- (power line)
3Vrms
3Vrms
Physical Characteristics
Power Consumption 3.3 V, 5V
350 mA @ 3.3 V transmit,
230 mA @ 3.3 V receive,
20 mA @ 3.3 V standby
Weight 50 g (4.8 oz)
Dimensions 12.8 x 5.3 cm (5.04 x 2.09 in.)
Antenna Built-in
LED Indicator ADHoc, Infrastructure (browsing AP
link)
Host Interface 68-pin connector to PC's PCMCIA Type
II slot.
Standards Conformance IEEE 802.11b
Environmental
Temperature 32 to 140°F/ 0 to 50°C (operating)
32 to 158°F/ 0 to 70°C (storage)
Humidity 5 to 80% (noncondensing)
Vibration/Shock/Drop IEC 68-2-34, IEC 68-2-27,
IEC 68-2-32
Certification
CE Mark EN55022 Class B, EN 55024,
IEC 61000-4-2/3/4/6/11
Emissions FCC Class B, ETS 300-328,
RCR STD-33 A
Software Drivers
NDIS Drivers Windows 95
Windows 98
Windows 2000
Windows NT 4.0