Installation For Windows Nt - SMC Networks EZ Connect SMC2602W User Manual

11. For more secure data transmission, set the "Use Wep" to io128
- bitl8 or ir64 - bitl8 to ensure wireless network security. The
advance Wired Equivalent Privacy (WEP) is implemented in this
card to prevent unauthorized access. The 128 bit setting gives
a higher level of security but the setting must be the same for
all clients in your wireless network. (Default: Disabled)
12. If you want to add more protocols after installation, go to
control panel and double click on "Network"
13. Select the "Configuration" tab and click "Add" to install the
network protocols you want to use, such as IPX/SPX, NetBEUI
or TCP/IP. If you install TCP/IP, be sure to set the appropriate
Gateway, DNS Server, and Domain for your network. If you
install an IPX/SPX-compatible protocol, then you also need to
install the Client for NetWare Networks.
14. Click "File and Print Sharing–lo to share files or printers.
15. Click on the "identification" tab on the Network dialog box,
and specify your computer name and network workgroup.
16. Click "Close" in the Network dialogue box and the system will
restart your computer.

Installation For Windows NT 4.0

1. From the desktop, select "control Panel" double- click
"Network" click "Adapters" and then click the "Add" button on
the Network dialog box.
2. Windows NT will present a list of all its supported adapters.
Click "Have Disk" to continue.
3. Windows NT will ask for the drive/path containing the
SMC2602W Windows NT drivers. Insert the SMC2602W Diskette
into the floppy drive, then type "A:\" and click "OK"
4. Windows NT will attempt to locate an INF file in the specified
path. If you have entered the path name correctly, Windows NT
will copy the appropriate drivers to the Windows NT system.
Select "SMC2602W EZ Connect Wireless PCI Adapter" and click
"OK"