Troubleshooting - SMC Networks EZ Connect SMC2602W User Manual

3. Enter your pass phrase and click on the "Generate" button to
create security keys.
4. Then click on the "Write" button to save the WEP keys.
5. Select one encrypted key (from Key 1 to Key 4) as your default
key.

Troubleshooting

Check the following troubleshooting items before contacting
Technical Support.
PCI Compatibility
Some PCI computers are not self-configuring and require you to
perform some or all of the following functions by motherboard
jumper changes and/or BIOS Setup program configuration:
• Make sure your BIOS correctly supports the PCI Local Bus
Specification v2.0 or later and upgrade your computer BIOS to
the latest version.
• Verify that the PCI slot is an enabled bus-master slot and not a
slave PCI slot. In some computers the PCI slot must be
configured to enable bus mastering. Refer to your PC's manual
and check the PCI BIOS Setup program to be sure the PCI slot
is an enabled bus-master slot.
• In some computers, you may be required to disable Plug ‚n Play
(PnP) in the BIOS Setup program if resources are not properly
assigned between installed cards.
• Some computers may require you to reserve interrupts and
memory addresses for installed ISA cards to prevent PCI
adapters from using the same settings. Refer to your PC's
manual and check the PCI BIOS Setup program configuration
options for ISA cards.
• Make sure the PCI slot is configured to support INTA.
• Be sure that INTA for the slot is assigned to a free interrupt
(IRQ) number.
• If it still does not work, remove the wireless adapter. Delete
CW10.sys from c:\windows\system. Then go to "Control Panel"
and delete the adapter from your network configuration menu.
Restart your PC and reinstall the card as described on page 5.