SMC Networks SMCWUSB-N User Manual page 28

6. Then connect successfully. The result will look like the below figure.
WPS Status Bar Description:
1. A successful PIN configuration :
Start PIN connection - SSID ~> Begin associating to WPS AP ~> Associated to WPS AP ~>
Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~> Receive EAP-Req (Start) ~> Sending
M1 ~> Received M2 ~> (Received M2D ~> Sending EAP-Rsp (ACK)) ~> Sending M3 ~>
Received M4 ~> Sending M5 ~> Received M6 ~> Sending M7 ~> Received M8 ~> Sending
EAP-Rsp(Done) ~> Configured ~> WPS status is disconnected ~> WPS status is connected
successfully-SSID
2. WPS configuration doesn't complete after two-minute connection:
WPS Eap process failed.
3. When Errors occur within two-minute connection, the WPS status bar might report on
"WPS Eap process failed".
Error messages might be:
1. Receive EAP with wrong NONCE.
27