Configuration - SMC Networks SMCWCB-N User Manual

EZ Connect™ N Draft 11n Wireless Cardbus Adapter

Configuration

This utility allows you to set the parameters for the wireless adapter.
Select Profile — To specify a profile for a specific configuration of parameters.
New — Click this button to create a new profile.
Save — Click this button to save a profile after configuring the settings.
Delete — Select the profile from the drop-down menu, and click this button to delete
the profile.
Auto Profile On/Off — Click this button to turn on/off the Auto Profile feature.
Active Profile — The profile settings that you are using for the current connection.
Common Tab
Network Name (SSID) — The network name is the Service Set ID (SSID) of a
wireless network. Enter the SSID of the wireless network to which you want to
connect, or select the SSID from the drop-down list.
Operating Mode — Select Infrastructure mode if you are connecting to a wireless
access point or a router. Select Ad Hoc mode to make a peer-to-peer connection
directly with other wireless clients. In Ad Hoc mode you will also be required to select
the wireless channel. Be sure to use the same channel for the access point and all
clients in your network.
Power Save — Enable or disable the power saving feature.
10