Sony CECHK06 Operating Instructions Manual page 14

Getting started
Setting up the PS3™ system
5
Select the resolutions supported by the TV, and then press
the button.
The resolution displayed on the TV varies depending on the input
connector and the type of cable used (
you selected will be used for video output. Depending on the connector
selected in step 2, this screen may not be displayed.
6
Confi rm the settings, select "Yes", and then press the
button.
Depending on the connector selected in step 2 and the resolutions
selected in step 5, this screen may not be displayed.
14
page 7). The highest resolution
7
Select the type of TV, and then press the
If you selected an SD resolution (
selecting the TV screen size will be displayed. Adjust the setting to match
the TV in use.
If you selected "720p" or a higher resolution in step 5, the TV type will
automatically be set to 16:9 and the screen for selecting the TV screen size
will not be displayed.
8
Confi rm the settings, and then press the
The video output settings will be saved on the system.
button.
page 6) in step 5, a screen for
button.