Supermicro H8SSP-8 User Manual page 21

Chapter 2: Installation
4. With the CPU inserted into the
socket, inspect the four corners of the
CPU to make sure that it is properly
installed and fl ush with the socket.
5. Gently press the CPU socket lever
down until it locks in the plastic tab.
Installing the Heatsink Retention Module
One heatsink retention module (BKT-0005) and two screws are included in the
retail box. Once installed, these are used to help attach the heatsink to the CPU.
To install, position the module so that the CPU backplate standoffs insert through
the holes on the heatsink retention module and the four feet on the module contact
the serverboard. Secure the retention module to the backplate with the two screws
provided. See Figure 2-1. Note: BKT-0005 is included for use with non-propri-
etary heatsinks only. When installing proprietary heatsinks, only BKT-0004 (CPU
backplate) is needed. The BKT-0005 retention module was designed to provide
compatibility with clip-and-cam type heatsinks from third parties.
Figure 2-1. CPU Backplate/Heatsink Retention Module Installation
Installing the Heatsink
We recommend the use of active type heatsinks (except for 1U systems). Connect
the heatsink fans to a fan header near the CPU. To install the heatsinks, please
follow the instructions included with your heatsink package (not included).
2-3