Gree GWH18YD-K6DNA2A Service Manual page 72

Service Manual
Step
3.Remove display and panel
a. Screws that are locking the display board.
Separate the display board from the front
panel.
b.
Open the front panel; separate the panel
rotation shaft from the groove fixing the
front panel and then removes the front
panel.
4.Remove detecting plate and electric box cover2
Remove the screws fixing detecting plate
and remove detecting plate.
Remove the screws on the electric box
cover to remove the electric box cover 2.
5.Remove front case sub-assy
Remove the screws fixing front case.
Loosen the clasps of front case Life the
front case sub-assy upwards to remove
it.
6. Remove vertical louver
Loosen the connection clasps between
vertical louver and bottom case to remove
vertical louver.
Remove the swing motor by screwing off the
connecting screws.
Installation and Maintenance
Procedure
Panel
Panel rotation
Groove
Detecting plate
Screws
Vertical
louver
Bottom
Clasps
case
Screws
Display
Electric box cover 2
Screw
Front case sub-assy
Clasps
Screws
Swing motor
69