Canceling The Program; Program End - Beko DU 9133 GA0 User Manual

Operating the product
C
If a new program is selected by
changing the position of the
program selection knob while
your machine is in stand-by
mode, the running program ends.
Do not contact the inner surface
of the drum when adding or
removing laundry during a
continuing program. The drum
surface is hot.

5.14 Canceling the program

If you want to cancel the program and end
the drying operation for any reason after the
machine starts running, press the On/Off
button.
A
As it will be extremely hot inside
the machine when you cancel
the program while the machine is
in operation; run the ventilation
program to cool it down.

5.15 Program end

When the program ends, the Final/Wrinkle
Prevention, Fiber Filter Cleaning and Water
Tank Warning leds on the program follow
up indicator light up. Loading door can be
opened and machine becomes ready for a
second run.
Press the On/Off button to turn off the ma-
chine.
C
In case the laundry is not
removed after the program
is completed, the wrinkle
prevention program that lasts 2
hours start in order to prevent
wrinkling of the laundry that
remains inside the machine.
C
Clean the fiber filter after each
drying. (See. „Fiber filter and
loading door inner surface")
C
Empty the water tank after
each drying. (See. „Emptying the
water tank")
Dryer / User Manual
23 / EN