Viewster - LG S62T1-C Service Manual

DIGITAL DISPLAY & MEDIA TRAINING MASTER

16. VIEWSTER

16-1. Viewster setup
(Before using the Viewster function, it guides a user network status)
Check the Network Connection
YES
Although you did retry 2~3 times,
same symptom occurs?
YES
Checking Network Configuration
Connect the player's LAN port to the corresponding port on your Modem
NO
Router using a LAN cable. Use a commercially available straight LAN
cable (Category 5/CAT5 or better with RJ45 connector)
If there is a DHCP (Dynamic Host Configuration Protocol) server on the
local area network (LAN), this player will automatically be allocated an
NO
IP address. If there is no DHCP server on the network and you want to
set the IP address manually, select [Static IP] then set the [IP Address],
[Subnet Mask], [Gateway] and [DNS Server] using [IP Setting] option
Select [NETWORK] on the [Setup] menu. And then Select [IP Mode]
NO
option on the [NETWORK] menu. And then Check the Network status indi-
cator changes according to Network configuration.
2-62