5. To remove the display panel:
a. Place the computer on a flat surface as indicated.
b. Remove the screws that secure the display hinges to the computer chassis [1].
c. Lift to remove the display panel [2].
Installing the display assembly
Steps
1. Align the display assembly with the display hinges of the computer chassis.
2. Tighten the screws that secure the display hinges.
3. Connect the display cables to the connector on the system board.
4. Route the display cables along the system fan module on the chassis.
5. Install the:
a.
WLAN card
b.
battery
c.
back cover
6. Follow the procedure in
Removing the display bezel
Steps
1. Follow the procedure in
After working inside your computer
Before working inside your
computer.
Disassembly and reassembly
37