Table of Contents
Advertisement
OPERATION
Pre-Operation Check
Inspect the watercraft each time before starting and riding to
ensure it is in proper working order. If proper inspection is not
done severe injury or death could result. See page 126 for
additional inspection information.
If you smell fuel in the hull of the craft, do not operate the craft.
Instead, take it to your dealer immediately for inspection.
Before inspection, remove lanyard and lock plate from the engine
stop switch located on the handlebars.
Following is a check list that should be performed before riding the
watercraft. The next few pages contain detailed information regarding
these checks.
Item
Fuel/water separator
Fuel/oil tank levels
Jet pump water intake Inspect and remove debris if present;
Throttle
Steering
Fire extinguisher
Storage compartment
Engine Cover
52
WARNING
What To Do
Visually inspect for water and drain if
present
Check fuel/oil; add as necessary;
visually inspect for presence of water
be sure intake grate is secure; push
rear of watercraft up and down in the
water to flush sand out of water in-
take before starting
Check for proper operation.
Check for proper operation; visually
inspect control cable
Inspect condition and expiration date
Check for secure latching
Check for secure latching
See
Page
64
54
55
56
56
57
58
58
Advertisement
Table of Contents
