4
|
Before operation
4 Before operation
4.1 Overview: Before operation
4.2 To insert the batteries
User reference guide
16
This chapter describes what you have to do before operating the unit.
Typical workflow
Before operation usually consist of the following stages:
▪
Inserting the batteries in the user interface.
▪
Fixing the user interface to the wall.
▪
Setting the brightness of the indoor unit display.
▪
Setting the clock.
▪
Turning on the power supply.
The batteries will last for about 1 year.
1 Remove the front cover.
2 Insert both batteries at once.
3 Put back the front cover.
AAA.LR03
INFORMATION
▪
Low energy of battery is indicated by flashing of LCD display.
▪
ALWAYS replace both batteries at once.
FTXTM-R, FTXTM-S
Daikin room air conditioner
4P728152-2 – 2023.03