Royal Sovereign ARP-7010 Owner's Manual page 9

Mode Descriptions
AUTO mode
When AUTO mode is selected the unit will automatically select the operation mode: Cool, dehumidify, fan, or heat (model ARP-7013H).
When the room temperature is less than 73 ºF the unit will automatically select the fan to turn on.
When the room temperature is between 73 ºF and 79 ºF the set temperature will be 73 ºF and the unit will automatically select dehumidify mode.
When the room temperature is greater than 79 ºF the set temperature will be 75 ºF and the unit will automatically select cool mode.
Cool mode
When the cool mode is chosen the air conditioner will run when the room temperature is higher than the set temperature. Fan speed and desired temperature can be changed
during cool mode.
Dehumidify mode
When in dehumidify mode the fan speed will run at low speed. The temperature will automatically be set to the current room temperature.
Heat mode (model ARP-7013H only)
When heat mode is selected the unit will run when the room temperature is lower than the set temperature.
Timer Operation
The timer can be used to turn the unit off after a set amount of time, or to turn the unit on after a set amount of time.
To use the timer to turn the unit on: While the air conditioner is off press the Timer button. The LED display will blink 01 and the timer mode icon will light up. Press the
Temp + and Temp – buttons to adjust the time up to 24 hours. Press the Timer button again to set the time. The timer mode indicator will light up to show that the timer is set.
The unit will turn on after the set time has passed.
To use the timer to turn the unit off: Press the Timer button. The LED display will blink 01 and the timer mode icon will light up. Press the Temp + and Temp – buttons to
adjust the time up to 24 hours. Press the Timer button again to set the time. The timer mode indicator will light up to show that the timer is set. The unit will turn on after the set
time has passed.
ARP-7010, ARP-7013, ARP-7013H
9