Royal Sovereign ARP-7010 Owner's Manual page 8

LED Display
1. AUTO Mode Indicator
2. Fan Speed Indicator
3. Cooling Mode Indicator
4. Temperature / Timer Display
5. Timer Indicator (when active)
6. Degree Indicator
7. Dehumidifier Indicator (when active)
Control Panel Operation
Automatic, Cool, Dehumidify Mode Operation
1. Turn the unit on
Press the On / Off button to turn the unit on. The current mode, fan speed, and temperature will light up.
Note: Even when air conditioner is turned off the LED display will show the mode the air conditioner was previously in and the current room temperature.
2. Select operating mode
Press the Mode button to choose between AUTO, Cool, or Dehumidify mode.
3. Adjust temperature
The desired temperature can be set within the range of 64ºF to 90 ºF. Press the Temperature + or – buttons to adjust temperature. Temperature can only be adjusted during
Cool mode.
4. Adjust fan speed
Press the SPEED button to select Low, Medium, or High Fan. Green bars = Low, Orange bars = Medium, Red bars = High Fan speed can only be adjusted during Cool mode.
5. Power Off
Press the On / Off button again to turn the unit off. The air conditioner will turn off, but the LED display will show current room temperature and the previous operation mode.
2 7
1
AUTO
4 5 6
3
8