Prepare The Remote Control - Philips Fidelio User Manual

Prepare the remote
control
•
unit to be operated from a distance.
•
Even if the remote control is
19.7 feet (6m), remote control
operation may be impossible if there
are any obstacles between the unit
and the remote control.
•
If the remote control is operated
near other products which generate
infrared rays, or if other remote
control devices using infra-red
rays are used near the unit, it may
operate incorrectly. Conversely,
the other products may operate
incorrectly.
Replace the remote control battery
Slide to remove the battery
compartment cover, insert 2 AAA
then slide the battery compartment
cover back into position.
•
Make sure the (+) and (–) ends of
the batteries match the (+) and
(–) ends indicated in the battery
compartment.
2
10 EN
1
3
Precautions Concerning Batteries
•
Be sure to insert the batteries with
correct positive " " and negative
" " polarities.
•
Use batteries of the same type.
together.
•
Either rechargeable or non-
rechargeable batteries can be used.
Refer to the precautions on their
labels.
•
removing the battery cover and the
battery.
•
Do not drop the remote control.
•
Do not allow anything to impact the
remote control.
•
Do not spill water or any liquid on
the remote control.
•
Do not place the remote control on a
wet object.
•
Do not place the remote control
under direct sunlight or near sources
of excessive heat.
•
Remove the battery from the remote
control when not in use for a long
period of time, as corrosion or
battery leakage may occur and result
in physical injury, and/or property
•
Do not use any batteries other than
•
Do not mix new batteries with old
ones.
•