Contents 5 Settings Contents Adjust speaker level Set display brightness 1 Important Auto standby Safety Apply factory settings Care for your product Care of the environment 6 Update software Compliance Check software version Help and support Update software via USB Update software via Wi-Fi 2 Your product What’s in the box...
1 Important Risk of injury or damage to this product! • For wall mounting, this product must be securely attached to the wall in accordance with the installation instructions. Use only Read and understand all instructions before you the supplied wall mount bracket (if available). use your product.
Hereby, MMD Hong Kong Limited declares that Care for your product this product is in compliance with the essential requirements and other relevant provisions of of Conformity on www.p4c.philips.com. Care of the environment Help and support Disposal of your old product and battery For extensive online support, visit www.philips.com/support to:...
• Turns white when in Eco standby (network disconnected). • Turns amber when in semi standby of product software upgrade), register your (network connected). product at www.philips.com/welcome. • Blinks fast when in Bluetooth pairing mode. What’s in the box Wi-Fi LED indicator •...
(Standby-On) Wireless portable speakers Switch this product on or to standby. (Source) This product comes with two wireless portable Select an input source for this product. speakers (left and right). • HDMI 1: Switch your source to the HDMI IN 1 connection. •...
Wireless subwoofer Connectors This product comes with a wireless subwoofer. This section includes an overview of the connectors available on the main unit. PAIR AC MAINS~ PAIR (Pair) HDMI IN 1 / HDMI IN 2 Press and hold to enter the pairing mode Connect to the HDMI output on a digital between the main unit and the subwoofer.
3 Connect and Note set up • Surround sound depends on factors such as room shape surfaces, and speaker acoustics. Experiment with the This section helps you connect this product to Follow these general guidelines for speakers a TV and other devices, and then set it up. For placement.
On your TV, turn on the HDMI-CEC Connect to TV operations. For details, see the TV use manual. Connect this product to your TV. You can enjoy Repeatedly press the source button until audio from TV programs through the soundbar E-ARC displays on the display panel.
Using an analog cable, connect the AUDIO Connect audio from TV or IN connector on this product to the other devices AUDIO OUT connector or analog audio output connectors (red and white) on TV or other devices. Play audio from TV or other devices through this product.
Manual pairing Manual pairing If no audio from the subwoofer can be heard, If no audio from the portable speakers can be manually pair up the subwoofer. heard, manually pair up the portable speakers. Unplug both the main unit and the Turn on the main unit and the portable subwoofer from the mains sockets, then speakers.
4 Use your product During charging, the LED on the portable speaker lights up red. When fully charged, the LED on the portable speaker turns off. This section helps you use this product to play media contents from all sources. Note Before you start •...
Surround Choose your sound to select SURR, then press Repeatedly press This section helps you choose the ideal sound the left and right navigation buttons to select for your video or music. audio upmix options. • UPMIX: Make sure that all speakers are utilized for contents less than 5.1.2 or 7.1.2 Sound mode •...
From your TV: Dolby Atmos ® • Movie with Dolby Atmos. • Your TV supports Dolby Atmos bitstream/ In addition to horizontal distribution of raw output. 5-channel audio, this product also has built-in • Your TV is connected to this product via Dolby Atmos enabled speakers as additional HDMI OUT connector.
Using the 3.5mm stereo audio cable, Note connect the MP3 player to the AUDIO IN • connector on this product. The maximum operational range between this product and a Bluetooth device is approximately 10 meters Repeatedly press the source button until (30 feet).
5 Settings Play-Fi wireless surround mode With DTS Play-Fi, your soundbar can be paired with multiple Play-Fi enabled speakers as wireless surround speakers. You can wirelessly listen to Adjust speaker level the same music in every room of your house. Note Repeatedly press to enter the settings menu,...
8 Product See the illustration on the separate wall mount sheet on how to wall mount the main unit. specifications 1) Drill 2 holes on the wall. 2) Secure the wall bracket on the wall with only for EU the dowels and screws. 3) Hang the main unit on the wall bracket.
Page 20
Dolby Digital EX, Dolby TrueHD, Dolby Atmos, DTS, DTS 96/24, DTS-ES, DTS Digital Main unit Surround (5.1-ch), DTS-HD High Resolution • Power supply: Model (Philips branded AC Audio, DTS-HD Master Audio, DTS ES, DTS: X power adapter): NSA120EC-19063200 • Optical: Dolby Digital, Dolby Digital plus, •...
Quality of audio play from a connected If you still have a problem, get support at Bluetooth device is poor. www.philips.com/support • The Bluetooth reception is poor. Move the device closer to the soundbar, or remove any Main unit obstacle between the device and the soundbar.
Page 22
AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano IMAX, IMAX ENHANCED are trademarks of and iPod touch are trademarks of Apple Inc., IMAX Corporation. registered in the U.S. and other countries. iPad Air and iPad mini are trademarks of Apple Inc. “Made for iPod”, “Made for iPhone”...