Table of Contents
Advertisement
Remote control
This section includes an overview of the
remote control.
1
(Standby-On) button
• Switch the soundbar On or to
standby.
• Long press for 20 seconds in power
on state to enable or disable APD
(15 minutes Auto-Standby)
2
(Source)
• Press to select an input source for
soundbar.
• Press and hold to disconnect all
devices and enter the Bluetooth
pairing mode.
3
(Dolby)
Select surround mode (UPMIX,
STANDARD, AI).
4
(Mute)
Mute or restore volume.
5 Navigation buttons
/
(Left/Right)
• Skip to the previous or next track in
USB/BT mode.
• Navigate Left/Right in menu
structure.
/ (Up/Down)
• Navigate up/down in menu structure.
(Center)
• Start, pause or resume play in USB/
BT mode.
6
(MENU)
Enter setup menu.
7
(Back)
Exit menu.
8
+/- (System's volume)
Increase / decrease the system's
volume.
9
+/- (Subwoofer's Volume)
Increase / decrease the subwoofer's
volume.
1
3
5
6
8
Prepare the remote control
•
The provided remote control allows
the unit to be operated from a
distance.
•
Even if the remote control is
operated within the effective range
19.7 feet (6m), remote control
operation may be impossible if there
are any obstacles between the unit
and the remote control.
•
If the remote control is operated
near other products which generate
infrared rays, or if other remote
control devices using infra-red rays
are used near the unit, it may operate
incorrectly. Conversely, the other
products may operate incorrectly.
2
4
7
9
EN
9
Advertisement
Table of Contents
