Bernina 7 Series Manual page 51

2
Calibrating buttonhole foot No. 3A/Cleaning/Packing position
1 2
►
If the data and the settings aren't on the sewing computer anymore after the
update:
⦁
1
►
3
⦁
1 Calibrating Buttonhole foot No. 3A
2 Cleaning the thread catcher
3 Packing position
3
⦁
⦁
⦁
►
►
The buttonhole foot No. 3A is matched to this sewing computer and should
only be used on this sewing computer.
⦁
⦁
if the update cannot be started or if there are problems during the update
process, an error message appears
touch icon 3
the data on the stick are saved on the sewing computer
touch «Cleaning/Calibrating»-icon
touch «Calibration»-icon
attach buttonhole foot No. 3A
touch «Start/Stop»-button
the buttonhole foot No. 3A moves forward and backwards
the buttonhole foot No. 3A is calibrated and the sewing computer indicates
whether the calibration has been successful
touch «Cleaning»-icon
clean the thread catcher according to the instructions
Setup Program Setup Program
51