Table of Contents
Advertisement
5
6
7
8
9
10
Automatic thread cutter and securing stitches
̶ the number and type of the securing stitches before the thread is cut can
be programmed
̶ standard = no securing stitches programmed
⦁
touch function 5 for securing stitches in place or function 6 for forward
securing stitches
⦁
using the arrow icons two to six securing stitches can be programmed
⦁
touch icon
Presser foot position when needle stop down
►
with activated icon 7, the presser foot remains down when the sewing
computer stops
►
with activated icon 8, the presser foot is raised enough to pivot the fabric
(hover position)
►
with activated icon 9, the presser foot is raised into its highest position
⦁
touch icon
Presser foot in hover position
⦁
turn the stitch width or stitch length knob or
⦁
touch arrow icons up/down or
⦁
move the round knob in the display using the finger
►
the margin of lifting can be adjusted from 0mm to 7mm.
Standard = 2mm
►
the respective value = the distance between material and presser foot, is
displayed in the icon 10
Reset settings
⦁
touch the yellow-framed icon
►
basic setting is restored
Setup Program
47
Advertisement
Table of Contents
