Table of Contents
Advertisement
Chapter 3
Modules
4.
Insert the module into the empty slot.
Figure 18: Installing a Power Module
1. Chassis 2. Power Module 3. Screws
5.
Hand-tighten the screws to secure the power module to the chassis.
6.
Turn on power to the module and confirm the module is receiving and supplying power. This is indicated by
the LEDs on the module.
LED
O
I
30
State
Green
The module is supplying power
Green
The module is receiving power
Installation Guide
1
2
3
Description
Installing/Removing Power Modules
RUGGEDCOM RX1511
Advertisement
Table of Contents
