Viking E-60-SS Product Manual

Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Entry Phones Now Mount in a Standard Double Gang Box
The E-60 Series entry phones are compact,
vandal resistant, telephone line powered
speaker phones designed to provide two-way
handsfree communication. The E-60's compact
size allows it to be mounted in a standard double
gang electrical box. The E-60 is available in four
different attractive finishes to match your door
hardware, light fixtures, etc. Replacement E-60
faceplates (PNL60) can be purchased
separately and are available in all four standard
finishes. The E-60's blue LED continually
provides light for locating the push button in dark
locations, dims to indicate off hook and flashes
during incoming ring.
The E-60 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250,
C-500 or C-2000B Entry Phone controller. The E-60 entry phones can also be connected to an unused analog station port (programmed for ring
down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer. The
E-60 features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic
hang-up when the call is completed. For outdoor installations where the unit is exposed to precipitation or condensation, the E-60 Series is
available with Enhanced Weather Protection (EWP). For more information on EWP, see DOD 859.
Features
• Compact size: Front panel is the size of a typical double gang mid-size
wall plate
• Mounting: Flush mounts in a double gang electrical box (2.25" deep x
3.65" wide x 2.84" tall minimum) or surface mounts in a Viking model
VE-5x5 (not included, see DOD 424) for mounting to a wall, post or
VE-GNP Gooseneck Pedestal (EWP recommended)
• Available in 4 standard faceplate finishes: Brushed Stainless Steel, Oil
Rubbed Bronze, Satin Black and Satin White
• PNL-60 faceplates: Replacement faceplates with matching screws
available in all four standard finishes
• Vandal Resistant Features: 18 gauge 304 stainless steel faceplate, 316
stainless steel push button, carbon fiber reinforced plastic speaker
screen, scratch resistant powder coating, hex drive mounting screws
• Weather Resistant Features: Mylar speaker, faceplate gasket, mic and
speaker gasket, internally sealed (IP67) push button switch, self draining
mic mount and UV stable weather resistant powder coating (excluding
E-60-SS 304 Stainless Steel faceplate)
• E-60-EWP is designed to meet IP66 Ingress Protection Rating (see DOD
859 for more information)
• Blue LED helps locate push button, indicate ringing and off hook
• Telephone line powered
• Microphone and speaker volume controls
• Programmable intelligent call progress detection for automatic hang-up on
CPC, silence, busy signal, or time out
• Selectable auto answer feature for monitoring
• Programmable VOX (mic/speaker) switching speed
• VE-LIGHT: Optional faceplate light kit for use with the VE-5x5 (see DOD
859 for more information)
PRODUCT MANUAL
E-60-SS "Brushed
Stainless Steel"
(similar to brushed nickel)
Shown with optional VE-5x5
box and (not included)
E-60-BN
"Oil Rubbed Bronze"
(satin dark brown
powder paint with fine
copper metallic)
Applications
• Door or gate communication, business delivery entrances
• Use with a Viking C-200 or C-250 to control E-60 on a single line
• Use with a Viking C-500 to control 1 or 2 (expandable to 8) E-60's
and door/gate control on a single phone line
• Use with a Viking C-2000B to control 1 to 4 E-60's and door/gate
control on a single phone line
• Provide unique front and back door chimes and paging when
used with a Viking SLP-1, SLP-4 and C-2000B
• Residential, commercial and industrial door security
• Use with a Viking K-1900-5 or K-1900-30 for automatic speed
dialing on telephone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable
ringdown capability
Specifications
Power: Telephone line powered. Minimum 18V DC talk battery
voltage with a minimum loop current of 20mA. Loop current may be
boosted on low current lines with a Viking model TBB-1B Talk Battery
Booster(see DOD 632).
Dimensions: Faceplate: 4.875" x 4.938" x 0.17" (123.8mm x 125.4mm
x 4.3mm), Phone: 2.84" x 1.8" x 1.65" (72mm x 46mm x 42mm)
Shipping Weight: 1.2 lbs (0.55 kg)
Operating Temperature: -30° F to 150° F(-34° C to 65° C)
Humidity: Standard model: 5% to 95% non-condensing humidity,
EWP model: up to 100% humidity
Speaker Volume: Approximately 62db maximum @ 1m
Ring Voltage: 25V AC RMS minimum (for auto answer)
CPC Disconnect Time: 300ms minimum
REN: 0.8A
Connections: (2) gel-filled butt connectors
E-60 Series
Double Gang
Entry Phones with LED
April 26, 2018
E-60-WH E-60-BK
"Satin Black"
"Satin White"
(fine texture satin
(satin white
black powder paint)
powder paint)