Dometic Coolmatic CR50 Operating Manual page 20

Installing and connecting the refrigerator
7.3 Undo the lock
The refrigerator has a locking mechanism (fig. 9 1, page 6) which is also used, to
protect it during transport. The following settings are possible:
A
NOTICE!
Only adjust the locking mechanism when the door is open. If you use it
with the door closed, you will damage the device.
• Lock (turn wheel clockwise to the end stop): The door is locked and secured.
To open the door, lift the handle up and open it.
• Vent (turn wheel anti-clockwise to the end stop): The door is slightly open, but
fixed in position.
Use this position, if you are not going to use the appliance for a long time.
7.4 Changing the door hinge
You can also change the hinge of the door, so that it opens to the left rather than the
right.
➤ Proceed as shown in fig. b, page 7 to fig. d, page 7, to change the hinges.
7.5 Connecting the refrigerator
Connect the refrigerator to DC power
The refrigerators can be operated with 12 Vg or with 24 Vg.
A
NOTICE!
To avoid voltage drops and loss of performance, keep the cable as short
as possible and avoid joins.
For this reason avoid additional switches, plugs or multi-way adapters.
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. e, page 8.
Key for fig. e, page 8
Co-ordinate axis
l
∅
20
Explanation
Cable length
Cable cross section
CoolMatic
Unit
m
mm²
EN