Installing And Connecting The Refrigerator - Dometic COOLMATIC CRX80 Installation And Operating Manual

Installing and connecting the refrigerator

7 Installing and connecting the
refrigerator
7.1 Safety instructions for installation on boats
Please note the following instructions for installation on boats:
D
DANGER!
If the appliance is powered by the mains, ensure that the voltage supply
has a residual current circuit breaker.
A
NOTICE!
• The device can be tilted sideways up to 30°. When setting up the
refrigerator, note that it must be fastened to take account of this. If
you have any questions regarding installation, consult your specialist
dealer.
• Install the refrigerator so that the warm air produced can easily flow
away (either upwards or to the sides, fig. 8, page 6).
• The appliance is designed for ambient temperatures between
+16 °C and +43 °C.
• CRX110ACDC, CRX140ACDC: In winter mode the appliance can be
operated at ambient temperatures between +10 °C and +16 °C.
7.2 Notes on installing the refrigerator
Observe the following when installing the refrigerator:
• Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides, fig. 8, page 6).
Key for fig. 8, page 6
No. Explanation
1 Cold intake air
2 Hot waste air
3 Condenser
4 Spacing above the refrigerator if there is not sufficient air to circulate
above or at the side.
20
CRX
EN