Basic Settings - AEG SatelliteClean 6000 FSB64907Z User Manual

Programme
Machine Care
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the
quantity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to: EN60436 ), send an email
to:
info.test@dishwasher-production.com

7. BASIC SETTINGS

You can configure the appliance by changing basic settings according to your needs.
Number Settings
1
2
3
4
5
6
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
dedicated bar of the ECOMETER
flashes.
The order of the basic settings presented
in the table is also the order of the
settings on the ECOMETER:
Water (l)
1)2)
Values
Water hardness 1L - 10L (de‐
fault: 5L)
Rinse aid empty On (default)
notification Off
End sound On
Off (default)
Auto door open On (default)
Off
Key tones On (default)
Off
Latest pro‐ On
gramme selec‐ Off (default)
tion
Energy (kWh)
9.9
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Description
Adjust the level of the water softener ac‐
cording to the water hardness in your area.
Activate or deactivate the rinse aid indica‐
tor.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the but‐
tons when pressed.
Enable or disable the automatic selection
of the most recently used programme and
options.
1 2
Duration (min)
0.600
1)
3 4 5 6
ENGLISH 11
60