Front Operator Panel Leds - Lenovo ThinkSystem SR675 V3 System Configuration Manual

The following table describes the problems that are indicated by drive activity LED and drive status LED.
Figure 15. Drive LEDs
Table 13. Drive LEDs
Description
LED
Drive activity
Each hot-swap drive comes with an activity LED. When this LED is flashing, it indicates that the
1
LED (green)
drive is in use.
The drive status LED indicates the following status:
• The LED is lit: the drive has failed.
Drive status
2
LED (yellow)
• The LED is flashing slowly (once per second): the drive is being rebuilt.
• The LED is flashing rapidly (three times per second): the drive is being identified.

Front operator panel LEDs

This section contains information about the front operator panel LEDs.
Figure 16. Front operator panel LEDs
Table 14. Front operator panel LEDs
Power button and power LED (green)
1
Network Activity LED (green)
2
1 Power button and power LED (green)
Press this button to turn the server on and off manually. The states of the power LED are as follows:
Status
Off
Fast blinking (about
four flashes per
second)
ThinkSystem SR675 V3 System Configuration Guide
30
Description
Color
Power is not present, or the power supply has failed.
None
• The server is off, but the XClarity Controller is initializing, and the server is not
Green ready to be powered on.
• System-board-assembly power has failed.
System ID button/LED (blue)
3
System Error LED (yellow)
4