Seat - Honda CB Unicorn 160 Owner's Manual

SEAT

The seat (1) must be removed for air
cleaner inspection, to remove the right &
left side cover or to access the tool kit, first
aid kit and owner's manual.
Removal:
1. Insert the ignition key (2) into the seat
lock (3) and turn it clockwise.
Installation:
1. Align the front prongs (4) under the
front of the seat with the recess (5)
under the frame cross member, and
locating the rear prongs (6) on the
bottom of the seat with the hooks (7)
on the frame.
2. Slide the seat into position and push
down on the rear of the seat.
Be sure the seat is locked securely in
position after installation.
36
(1)
(4)
(7)
(5)
(1) Seat
(2) Ignition key
(3) Seat lock
(4) Front prongs
(5) Recess
(6) Rear prongs
(7) Hooks
(6)
(3)
(2)