Additional Safety Rules - Skil MS6305-00 Owner's Manual

blade to stop before removing the cut-off piece.
before the saw head is completely in the down position.

ADDITIONAL SAFETY RULES

MAKE WORKSHOP CHILDPROOF WITH PAD LOCK, MASTER SWITCHES
To reduce risk of injury, use saw blade rated 4800/min (RPM) or greater.
Do not use the power tool for purpose not intended -
Before plugging in the tool, be certain the outlet voltage supplied is compatible with
the voltage marked on the nameplate within 10%.
Do not stand on tool or its stand.
Do not leave tool running unattended; turn power off.
If blade does not stop within ten (10) seconds, unplug the saw and follow the
instructions in the Troubleshooting section.
Use clamps or other practical way to secure and support the workpiece to a stable
platform.
When cutting irregularly shaped workpieces, plan your work so it will not slip and pinch
the blade and be torn from your hand.
For chop-action cutting, move the head assembly to the rear as far as it will go and
engage the mechanism lock.
Do not operate the saw in certain of the miter and bevel combinations which
Always disconnect the power cord from the power source before transporting the
miter saw.
Think Safety!
There are additional safety instructions for particular operations of the saw in the Saw
Operations section. Read the rest of the manual for safe operation.
Before each use, review all warnings located on the mitre saw.
6