Roland XV-5080 Quick Start Manual page 47

6
Turn the VALUE dial to select "SCSI3: (Volume Name)."
7
Press the [F6 (OK)] button.
The CD-ROM's contents are displayed.
Folders appear within the <> symbols. Folders cannot be load.
The types of folders appearing on the screen may differ according to the
library that has been loaded.
8
Turn the VALUE dial or press [
containing the file you want to load.
9
Press [ ] to display the files that can be loaded.
* Press [ ] to move up one level.
10
Turn the VALUE dial or press [
be loaded, then press [F5 (Mark)] button to place a "*" marker.
To place a marker on all categories, press [F4 (Mk All)] button. Press this
once more to remove all markers.
11
Press the [F6 (Select)] button.
12
Press the [F6 (Load)] button.
The message "Overwrite the following USER data. Sure?" and a window
showing the number of the Patch in the User Group that will be overwritten
appear in the display.
In this window, you can specify the Patch number to which the Patch is to
be loaded.
13
Here, press [F6 (OK)] to overwrite and load.
* To cancel the operation, press the [EXIT] button.
Let's Play Sounds From a Sampler Library
] or [ ] to select the folder
] or [ ] to select the Patch to
If you want to restore
overwritten User Group
Patches to the original
settings, carry out the
Factory Reset procedure (p.
13).
47