Connecting To Midi Devices And Audio Equipment - Roland XV-5080 Quick Start Manual

Connecting to MIDI Devices and Audio
Equipment
The XV-5080 does not contain an amp or speaker. To hear sound, you will need to
connect it to a keyboard amp or audio system, or connect headphones. Refer to the
following figure when connecting the XV-5080 with external devices.
fig.00-009.e(connections)_98
Power amp
External MIDI device
(MIDI Keyboard, Sequencer, etc.)
to Power outlet
1
Before you make connections, make sure that power is turned off for
all devices.
2
Connect supplied AC power cable to the XV-5080, and plug the
other end into an AC power outlet.
3
Connect audio and MIDI cables as shown in the diagram. If you are
using headphones, plug them into the PHONES jack.
Mixer, etc.
Speaker
(with built-in Amp)
MIDI OUT
MIDI IN 1
Connect to CD-ROM
Drive/Zip Drive, etc.
Refer to Owner's Manual;
p. 185, 239.
Getting Ready to Play
Stereo set, etc.
make connections to
the A(MIX) OUTPUT jacks
Refer to Chanpter 3
(Owner's Manual; p. 119).
Stereo headphones
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
11