Advertisement
Functions for utilizing DVD-R/RW discs
You can utilize DVD-R/RW discs for the following two VS-2480DVD functions.
Project back up
◆ In case you are using DVD-R discs
In the same way as with CD-R discs, you can carry out a backup onto a DVD-R disc only once. You cannot amend or delete
the backup data.
◆ If DVD-RW discs already contain data
In the same way as with CD-RW discs, you cannot add project data to the blank part of a DVD-RW disc that already
contains some data. Before using such discs for backup, all of the data on the disc must be erased. If such a disc is
loaded, the "CD-RW Erase?" dialog appears during the operation.
Pressing ENTER/YES will execute erasure of the data contained on the disc and start the backup.
◆ Time it takes to perform backup
The amount of time required to perform a backup depends on the type of discs used.
The time stated below will be how long it takes to back up a 4 GB project.
Type of Disc
DVD-R
DVD-RW
CD-R
CD-RW
*1 On/Off of Verify can be set on the PROJECT BACKUP screen.
*2 Writing time differs depending on type or manufacturer of discs.
*3 If the size of the project exceeds the storage capacity of one CD-R/RW disc, it will be backed-up across multiple CD-R/RW discs.
Project recover
Writing and reading speed from/to discs
All the speed parameters for writing and reading are set to "MAX" automatically in all the operations
using the DVD multi drive.
Please see "BACKUP" on p.105 of VS-2480 owner's manual.
*1
Verify
Time to write
Off
Approx 40 minutes
On
Approx 70 minutes
Off
Approx 60 minutes
On
Approx 90 minutes
Off
Approx 140 minutes *3
On
Approx 160 minutes *3
Off
Approx 150 minutes *3
On
Approx 180 minutes *3
Please see "RECOVER" on p.107 of VS-2480 owner's manual.
*2
3
Advertisement
