Canceling The Capture; Capturing Time; To Save The Plural Automix Data - Roland VS-2480 New Features Manual

Functionality added in Version 2.00

Canceling the capture

If you want to cancel capture in the middle, operate as follows.
1.
Press [EXIT/NO].
A message "Abort?" appears.
2.
Press [ENTER/YES] to cease capture.
Press [EXIT/NO] to re-start capture.

Capturing Time

Capturing time differs according to recording mode as follows.
Recording Mode
CDR (CD writing)
M16, M24 (Mastering)
Others

To save the plural automix data

Each project can store the nine automix data.
1.
Create automix data.
2.
To save the current automix data, press (click) [UTILITY]. Press
(click) PAGE 3 [F2 (A.MIX)]. The automix screen will appear.
3.
Press (click) [F4 (SAVE)]. The automix save screen will appear.
4.
Nine "patterns" (i.e., sets) of automix data can be saved. Move the
cursor to the number that you want to save, and press (click)
[F5 (OK)]. The display will ask "Save AUTOMIX Pattern?"
5.
To save the data, press [ENTER/YES] (click [YES]). The current
automix data will be saved at the specified number. If you want to
cancel, press [EXIT/NO] (click [NO]). By pressing [F1 (NAME)] you
can assign a name to the automix pattern that is saved.
6.
If you want to continue editing automix data, press
[HOME (DISPLAY)] or click "HOME" in the upper right of the VGA
screen. You will return to the HOME screen.
30
Approx. 40% of actual time
Approx. 80% of actual time
Approx. 150% of actual time