Additional Adjustments; Setting The Display Contrast; Setting The Display Brightness; Entering Names For The Heating Circuits - Viessmann VITOCROSSAL 300 CU3A 35 Operating Instructions Manual
Floor mounted, gas-fired condensing boiler with matrix gas burner and lambda pro control, for operation with natural gas and liquid propane gas, heating input 19 to 199 mbh, 5.6 to 58 kw, with vitotronic 200 kw6b controls
Hide thumbs
Also See for VITOCROSSAL 300 CU3A 35:
- Technical data manual (33 pages) ,
- Service instructions manual (116 pages) ,
- Installation instructions manual (60 pages)
Table of Contents
Advertisement
Vitocrossal 300 CU3A 26 to 199 Operating
Setting the Display Contrast
Setting the Display Brightness
If you would like the texts in the menu to be more
clearly legible, change the brightness for "Control".
You can also alter the screen saver brightness.
Entering Names for the Heating Circuits
Example: Name for "Heating circuit 2": Apartment
The menu shows "Apartment" for "Heating circuit 2".
Extended menu
1.
2. "Settings"
3. "Contrast"
4. Set the required contrast.
Extended menu
1.
2. "Settings"
3. "Brightness"
4. "Control" or "Screen saver"
5. Set the required brightness.
You can name all heating circuits individually. The
abbreviations "HC1", "HC2" and "HC3" will be retained.
Extended menu
1.
2. "Settings"
3. "Name for heating circ."
4. "Heating circuit 1", "Heating circuit 2" or "Heating
circuit 3"
5. "Change?"
6. You can select the required symbol with
7.
takes you to the next character.
8. Press OK to accept all entered characters at once
and simultaneously exit this menu.
Note: You can delete the name entered with "Reset?".
Additional Adjustments
.
29
Advertisement
Table of Contents
