How To Use The Controls - Viessmann VITOCROSSAL 300 CU3A 35 Operating Instructions Manual
Floor mounted, gas-fired condensing boiler with matrix gas burner and lambda pro control, for operation with natural gas and liquid propane gas, heating input 19 to 199 mbh, 5.6 to 58 kw, with vitotronic 200 kw6b controls
Hide thumbs
Also See for VITOCROSSAL 300 CU3A 35:
- Technical data manual (33 pages) ,
- Service instructions manual (116 pages) ,
- Installation instructions manual (60 pages)
Table of Contents
Advertisement
Vitocrossal 300 CU3A 26 to 199 Operating
How to Use the Controls
Legend
B Current outside temperature
C Standard room temperature
The screen saver will become active if you have not
adjusted any settings on the programming unit for a few
minutes. The display brightness is reduced.
OK
1. Press
. This takes you to the standard menu
(refer to page 14).
2. Press
This takes you to the extended menu (refer
to page 14). The selected menu option is highlighted
in white. The dialogue line E (refer to diagram on
page 14) then shows the necessary instructions.
Adjustments to the central heating can be made for
every heating circuit. It is therefore necessary to select
the respective heating circuit prior to making any
adjustments (e.g. standard room temperature).
The following diagram shows how to make adjustments,
using the standard room temperature as an example.
The diagram shows the adjustment without and with
selection of the heating circuit, as well as different dialog
lines.
Operation
15
Advertisement
Table of Contents
