Roland VG-88 Quick Start Manual page 2

V-guitar system

Hide thumbs Also See for VG-88:

Installing the GK-2A on your guitar

First, you will need to attach the GK-2A divided pickup to your guitar. To learn how, refer to the owner's

manual for the GK-2A.

* Use the normal guitar cable included with the GK-2A to connect your guitar to the normal guitar input jack of the

GK-2A.

* Set the GK-2A select switch to the "MIX" position.

Make connections appropriate for your equipment

Connect the VG-88 to the amp's RETURN or MAIN IN jack.

This allows you to get the sound of the VG-88 itself without bypassing the amp's preamp section, which

determines the amp's individual sound qualities.

fig.q01

* If the amp has no RETURN or MAIN IN jack, connect to the INPUT jack, then adjust the amp's tone controls as

follows.

BASS=0, MIDDLE=10, TREBLE=0

The suggested settings of BASS=0, MIDDLE=10, and TREBLE=0 are general guidelines. The optimal settings

may be different for your amp. Adjust the tone controls of your amp so that its frequency response is flat.

* If the amp features L and H INPUT jacks, connect the VG-88 to the L jack.

* If the amp features channel switching, select NORMAL (CLEAN).

Press the OUTPUT SELECT button and select "POWER AMP+SP/RETURN."

COMBO:

STACK:

fig.q01a

OUTPUT

Combo type (single unit containing amp and speaker)

Stack type (amp and speaker are separate)

RETURN or MAIN IN