Roland VariOS User Manual page 20

Screen reference
RING
Parameter Value
Freq 0–127
Balance DRY100:0WET–DRY0:100WET Volume balance between the direct sound (DRY) and the ring modulated sound
EQ
Parameter Value
Low Freq 50–4000 Hz
Low Gain -15– +15 dB
Mid Freq 50–20000 Hz
Mid Gain -15– +15 dB
Hi Freq 2000–20000 Hz Frequency of the high range
Hi Gain -15– +15 dB
P.SHIFT
Parameter Value
Grade 1–5
Coarse -12– +12 semitone
Fine -100– +100 cent
Balance DRY100:0WET–DRY0:100WET
PHASER
Parameter Value
Manual 0–127
Rate 0.05–10.0 Hz Specifies the frequency of modulation.
Depth 0–127
Reso 0–127
MixLevel 0–127
20
Description
Frequency at which modulation will be applied
(WET)
Description
Frequency of the low range
Gain of the low range
Frequency of the middle range
Gain of the middle range
Gain of the high range
Description
Sets the grade of the effect sound.
The higher the value is set, the more natural-sounding can be obtained; however,
this increases the delay from the source sound as well.
Specifies the pitch shift amount in semitone steps.
Adjusts the pitch shift amount in 2-cent steps (1 cent = 1/100 of a semitone).
Volume balance between the direct sound (DRY) and the effect sound (WET)
Description
Specifies the center frequency at which the sound is modulated.
Specifies the depth of modulation.
Specifies the amount of feedback for the phaser.
Higher settings will give the sound a stronger character.
Specifies the volume of the phase-shifted sound, relative to the direct sound.