Advertisement
V-44SW MIDI Implementation
3. Parameter Address Map
■3-1. V-44SW (Model ID = 00H 00H 10H)
* Addresses marked by # are sent as two bytes; an upper nibble (upper 4 bits) and lower nibble (lower 4 bits).
Example) If the original data is BCH, 0BH is transmitted as the first byte. The next byte transmitted is 0CH. For reception, this is ignored if two bytes are not received together.
* Addresses marked by ## are sent as two bytes; an upper nibble (upper 6 bits and lower MSB) and lower nibble (lower 7 bits).
Example) If the original data is 01FFH, 03H is transmitted as the first byte. The next byte transmitted is 7FH. This is ignored if two bytes are not received together.
* Do not transmit data to the address whose Parameter Name is "Reserve".
* The factory-default Device ID is 10H.
+————————————————+————————————————————————————————————————————————+
|Start Address
|Description
+————————————————+————————————————————————————————————————————————+
|00H 00H 00H
| System Common Preference Area
|01H 00H 00H
| Panel Control Preference Area
|02H 00H 00H
| ———
|03H 00H 00H
| Key Control Parameter
|04H 00H 00H
| PinP Control Parameter Area
|05H 00H 00H
| ———
|06H 00H 00H
| ———
|07H 00H 00H
| Video Fader Control Parameter
+————————————————+————————————————————————————————————————————————+
●3-1-1. System Common Preference
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
|Address
|Parameter Name
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
|00H 00H 00H
|MIDI Receive Channel
|00H 00H 10H
|———
|00H 00H 11H
|———
|00H 00H 12H
|———
|00H 00H 13H
|———
|00H 00H 14H
|———
|00H 00H 15H
|———
|00H 00H 16H
|Panel Operation Mode
|00H 00H 17H
|Reserve
|00H 00H 18H
|Reserve
|00H 00H 19H
|———
|00H 00H 1AH
|Reserve
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
●3-1-2. Panel Control Preference
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
|Address
|Parameter Name
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
|#01H 00H 00H
|———
|#01H 00H 02H
|———
|#01H 00H 04H
|———
|#01H 00H 06H
|———
|#01H 00H 08H
|———
|#01H 00H 0AH
|———
|#01H 00H 0CH
|———
|#01H 00H 0EH
|Tx/Rx Setting
|#01H 00H 10H
|Tx/Rx Setting
|#01H 00H 12H
|Tx/Rx Setting
|#01H 00H 14H
|Tx/Rx Setting
|#01H 00H 16H
|Tx/Rx Setting
|#01H 00H 18H
|Tx/Rx Setting
|#01H 00H 1AH
|———
|#01H 00H 1CH
|———
|#01H 00H 1EH
|Tx/Rx Setting
|#01H 00H 20H
|Tx/Rx Setting
|#01H 00H 22H
|Tx/Rx Setting
|#01H 00H 24H
|Tx/Rx Setting
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
●3-1-3. Key Control Parameter
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
|Address
|Parameter Name
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
|##03H 00H 00H
|Key Type
|##03H 00H 02H
|Key Level
|##03H 00H 04H
|Key Edge
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
●3-1-4. PinP Control Preference Area
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
|Address
|Parameter Name
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
|##04H 00H 00H
|PinP Size
|##04H 00H 02H
|PinP X Position
|##04H 00H 04H
|PinP Y Position
|##04H 00H 06H
|PinP Zoom
|##04H 00H 08H
|PinP X Pan Position
|##04H 00H 0AH
|PinP Y Pan Position
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
●3-1-5.Video Fader Control Parameter
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
|##07H 00H 00H
|———
|##07H 00H 02H
|Video Fader
+———————————————+———————————————————————————————————————+——————————————————————————————————————+——————————————————————————————————————————————+
4
(See 3—1—1)
(See 3—1—2)
(See 3—1—3)
(See 3—1—4)
(See 3—1—5)
|Sys.Ex.Value
|00H — 10H
|———
|———
|———
|———
|———
|———
|00H — 01H
|00H — 07H
|00H — 01H
|———
|———
|Sys.Ex.Value
|———
|———
|———
|———
|———
|———
|———
(TAKE Switch)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
(Transition Pattern)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
(Transition Time)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
(Video Fader)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
(Key Switch)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
(PinP Switch)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
|———
|———
(Panel Preset Switch)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
(OutputFormat Switch)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
(Fade Switch)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
(Fade Level)
|01H—05H,07H—1FH,40H—5FH,D0H,E0H,FFH
|Sys.Ex.Value
|0000H—0003H
|0000H—00FFH
|0000H—000FH
|Sys.Ex.Value
|0014H—0064H
|0032H—0064H—0096H
|0032H—0064H—0096H
|0064H—03E8H
|0000H—0064H—00C8H
|0000H—0064H—00C8H
|———
|0000H — 3FFFH
|
|
|
|
|
|
|
|
|
|Meaning of Value
|1 — 16 Ch, OFF
|———
|———
|———
|———
|———
|———
|Direct Mode, Preset Mode
|System Parameter
|System Parameter
|———
|System Parameter
|Meaning of Value
|———
|———
|———
|———
|———
|———
|———
|Control Change, Channel Press, Pitch Bend, OFF|
|Control Change, Channel Press, Pitch Bend, OFF|
|Control Change, Channel Press, Pitch Bend, OFF|
|Control Change, Channel Press, Pitch Bend, OFF|
|Control Change, Channel Press, Pitch Bend, OFF|
|Control Change, Channel Press, Pitch Bend, OFF|
|———
|———
|Control Change, Channel Press, Pitch Bend, OFF|
|Control Change, Channel Press, Pitch Bend, OFF|
|Control Change, Channel Press, Pitch Bend, OFF|
|Control Change, Channel Press, Pitch Bend, OFF|
|Meaning of Value
|Key Type
|Key Level
|Key Edge
|Meaning of Value
|Size (20% — 100%)
|X position (—50% — 0% — +50%)
|Y position (—50% — 0% — +50%)
|Zoom (100% — 1000%)
|X Pan position (—100% — 0% — +100%)
|Y Pan position (—100% — 0% — +100%)
|———
|Position (0 — 16383)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advertisement
