• Reassemble in reverse order
• Product will now need configured ( refer 6.11)
7.1.6
Removal of the Filter Board
• Remove the product from the bench (refer 7.1.1)
• Remove the ceramic glass ( refer 7.1.2)
• Remove the inductor coils (refer 7.1.3)
• Remove the touch controller ( refer 7.1.4)
• Remove screws retaining the cover panel
• Lift panel away to expose power boards & filter board
• Remove wiring from filter board
• Using a flat blade screwdriver, press in the retaining clips holding the filter
board in place and lift up to release.
• Reassemble in reverse order
• Product will need configured ( refer 6.11)
35
599653A