Vizio Quantum P Series User Manual page 16

Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the color management system, 20 point
white balance, turn color channels off for testing, and display SMPTE, flat, ramp, and
uniformity analyzer test patterns.
To access the color tuner table:
Menu > Picture > Advanced Picture > Color Calibration
Tuner
WARNING: The Color Tuner, 20 Point White Balance, and
test patterns allow technicians to manually calibrate the TV.
Calibration requires specialized training, an input with precisely
set colors, and a specialized light meter.
To turn color channels off and on:
1. Use the Navigation buttons on the remote to highlight Red, Green, or Blue.
2. Press the OK button to turn the color channel off or on. An X appears over a
color channel that has been turned off.
3. Only two color channels can be turned off at the same time.
TIP: Any changes made affect the color temperature setting.
Select the preferred color temperature setting first. See Adjusting
the Color Temperature on page 8.
To adjust the color management system/20 point white balance
settings:
1. Use the Navigation buttons on the remote to highlight the Hue, Saturation,
Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button.
2. Use the Left/Right Navigation buttons to adjust the value. When you are
finished press the OK button to save the setting.
> Color
Color Tuner
Red Green
Hue 0 0
Saturation -1 5
Brightness -24 0
Offset 0 0
Gain 0 0
To adjust the 20 Point White Balance settings:
3. From the Color Tuner table, use the Navigation buttons to highlight the top bar
and then press the Left/Right Navigation buttons until the 20 POINT WHITE
BALANCE menu is displayed.
20 Point White Balance
Gain Red
5% 0
Use the Navigation buttons on the remote to highlight the Gain and Color values
4.
you wish to adjust. Press the OK button and use the Left/Right Navigation
buttons to adjust the value. When you are finished, press the OK button to save
the setting.
To show or hide the SMPTE Test Pattern:
Menu
Tuner
Blue Cyan Magenta Yellow
0 0 25 -14
Use the Navigation buttons on the remote to highlight Off. Use the Left/Right
1.
-4 0 -2 0
Navigation buttons to select On to show the SMPTE Pattern.
-22 0 0 0
0
0
2. To hide the SMPTE Test Pattern, use the Left/Right Navigation buttons to
select Off.
Green Blue
0 0
> Picture > Advanced Picture > Color Calibration
> SMPTE Test Pattern
SMPT Test Pattern
Off
—or—
3
> Color
10