Changing The Picture Aspect Ratio; Adjusting Advanced Picture Settings - Vizio Quantum P Series User Manual

Changing the Picture Aspect Ratio

To change the screen aspect ratio:
Menu > Picture > Picture Aspect
Use the Navigation buttons to highlight the aspect ratio you wish to view.
Your TV can display images in different modes:
• Normal (default) — No change to aspect ratio.
• Panoramic — Stretches a 4:3 image to fill 16:9 screen with an algorithm so the
*
center doesn't look stretched.
Wide — Stretches a 4:3 aspect ratio to fill 16:9 screen. If a 16:9 image, adds
•
black bars to top and bottom.
• Zoom — Expands image both horizontally and vertically by 14%.
• Stretch * — When the 16:9 signal is a 4:3 image with black bars left and right,
stretches to fill the screen.
Some programs have black bars on the top or sides of the screen so that the
picture keeps its original shape. Examples include widescreen movies and older TV
programs.
Normal Stretch Wide Zoom
TIP: The aspect ratio cannot be changed for Ultra
HD content or HDR content.
* Available aspect ratio settings may vary by input source. Panoramic mode is only available for standard
definition TV (480i/480p) and Stretch mode is only available for high definition TV (720p/1080i/1080p).

Adjusting Advanced Picture Settings

To adjust advanced picture settings:
Menu > Picture > Advanced Picture
Use the Navigation buttons to highlight the setting you wish to adjust, then press
the Left/Right Navigation buttons to change the setting:
• Black Detail — Adjusts the average
brightness of the picture to compensate for
Advanced Picture
large areas of brightness.
Black Detail
• Super Resolution — Configures the
Super Resolution
resolution to enhance dim and blurred
pictures resulting in a sharper image.
Edge Enhancement
Local Contrast
• Edge Enhancement — Increases the
Active Full Array
smoothness of edges.
Motion Control
• Local Contrast — Adjust the contrast of
Reduce Noise
the picture locally.
ProGaming Engine
• Active Full Array ™ — Based on the
Film Mode
content, dynamically adjusts and balances
Gamma
the brightness and the contrast ratio of
Enhanced Viewing Angle
the picture by locally adjusting backlight
zones.
• Motion Control:
− Judder Reduction: Increases frame rate to reduce judder for film and 30
hertz video. As the setting increases, judder is reduced.
−
Motion Blur Reduction: Increases frame rate to reduce motion blur of 60
hertz video. As the setting increases, motion blur is reduced.
− Clear Action: Reduces blur in scenes with fast action but limits the range for
the Backlight setting.
• Reduce Noise:
−
Signal Noise: Lessens artifacts in the image caused by the digitizing of image
motion content.
− Block Noise: Reduces pixelation and distortion for mpeg files.
−
Contour Smoothing: Removes visible contour noise without loss of the
complex detail.
• ProGaming Engine :
™
−
Game Low Latency: Lessens artifacts in the image caused by the digitizing
Off
of image motion content.
Medium
− Variable Refresh Rate: Reduces pixelation and distortion for mpeg files.
Low
−
Game HDR: Removes visible contour noise without loss of the complex detail.
Low
TM Medium
Film Mode — Optimizes the picture for watching films. Select On or Off.
•
• Gamma — Set the shape of the Gamma curve. Use lower Gamma values for
bright room conditions, and higher values when it's dark.
Enhanced Viewing Angle — Increases the viewing angle with richer colors and a
•
On
higher contrast image. This mode reduces horizontal resolution.
2.1 - Normal
Off
• Color Calibration — Calibrate colors using HSB, gain, offset and 20 point white
balance and test or reset colors to defaults.
3
9