Maytag JEA8120AD Technical Information page 3

Electric slide-in range

Table of Contents

Component Testing Procedures

To avoid risk of electrical shock, personal injury or death; disconnect power to range before servicing, unless

testing requires power.

Illustration

Infinite switch

Temperature sensor

Cooling fan motor

Downdraft motor

NOTE: Downdraft fan

will not engage if pan

(snap) switch is not

activated.

Electronic control

Coil element,

1250 W, 4-turn

Coil element,

2100 W, 5-turn

Ribbon element, 1800 W

Ribbon element, 1200 W

Grill assembly

March 2006

WARNING

Component

Remove wiring from P1 and P2.

Connect volt/ohms meter to P1 and

P2. Measure the following for voltages

at LO, MED, HI: ......................................

Voltage between P1 and P2....................

Measure resistance ................................ Approx 1000 Ω at room temperature,

Measure voltage .....................................

Check motor windings to ground.............

Measure voltage .....................................

Check motor windings to ground.............

NOTE: To avoid equipment damage,

use caution when checking electronic

control circuitry voltages.