Table of Contents
Advertisement
6
Maintenance and cleaning
6.1 Filter Cartridge / Door Inner Surface
Lint and fibres released from the laundry to the air
during the drying cycle are collected in the "Filter
Cartridge".
C
Such fibre and lint are generally formed
during wearing and washing.
Always clean the filter and the inner
surfaces of the cover after each drying
process.
You can clean the filter and filter area by
vacuum cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up and open the
filter.
3. Clean lint, fibre, and cotton raveling by hand or with
a soft piece of cloth.
4. Close the filter and place it back into itsseat.
C
Clogging may arise on the filter surface
after using your machine for some time; if
this occurs, wash the filter with water and
dry it before using again.
Clean the entire inner surface of the cover
and door gasket.
20
6.2 Sensor (models equipped with a
sensor)
There are humidity sensors in your machine that detect
whether the laundry is dry or not.
For sensor cleaning;
1. Open the door of the machine.
2. Allow the machine to cool off if drying has been
carried out.
3. Wipe the metal sensors with a soft cloth, dampened
with vinegar and dry them.
C
Clean metal sensors 4 times a year.
A
Never use solvents, cleaning agents or
substances alike when cleaning as these
might cause fire and explosion!
Dryer / User Manual
Advertisement
Table of Contents
