Basic Operations - Roland MV-8000 Quick Start Manual

Preparations and concepts

Basic operations

Moving the cursor
Each screen displays various parameters (items to set) or menus (items to
select). To edit the value of a parameter, move the cursor to the value you
want to edit. To select a menu item, move the cursor to the desired item. The
cursor is enclosed in a frame as shown below.
Cursor
Use to move the cursor.
● Finalizing a menu selection
Press to finalize the selected menu item. The selection or command
(operation) will be executed.
Editing the value of a parameter
To edit the value of a parameter, use the VALUE dial or [DEC]/[INC].
● VALUE dial
Turn the VALUE dial toward the right
to increase the value, or toward the
left to decrease it.
● [DEC]/[INC]
Press to increase a value. Press
Using the F (function) buttons
The top panel F buttons (
functions assigned to them depending on the
screen shown in the LCD. These buttons
correspond one-to-one with the function names
shown at the bottom of the LCD.
8
decrease
to decrease a value.
– ) have various
Cursor (highlighted)
Black characters
on white background
(value display)
If functions are shown at the
bottom of the LCD, you can
use the F buttons to select
them directly.
To edit a parameter value,
move the cursor to an area
displayed in black characters
on a white background.
increase
You can hold down [SHIFT]
and use the VALUE dial or
[INC][DEC] to change a value
in larger steps.
You can continue holding
down [DEC] or [INC] to make
the value continue changing
("repeat"). At this time, you
can hold down the other
button as well to make the
value change even faster
("turbo repeat").