A.O. Smith BFC Cyclone 28 Installation, User And Service Manual page 39

4.3.10.2
n
4.3.10.3
n
0311704_BFC_28-120_III_ENEN_V2.4, 2022-10-17
Setting day and time
To enter the time and day:
1. Call up the menu for entering the day and time as follows:
2. [ ]: SETTINGS.
Confirm with [ENTER].
The display shows the menu for settings.
3.
Scroll with [ ] and [ ] to DAY/TIME.
Confirm with [ENTER].
The display shows the sub-menu for adjusting the day.
4. The cursor is positioned beside Sunday.
Scroll with [ ] and [ ] to the desired day.
Confirm with [ENTER].
The day has been set. The display shows the submenu for adjusting the time.
5. The cursor moves to the hour digits, which will blink.
Scroll with [ ] and [ ] to the current hour, for example 15.
Confirm with [ENTER].
6. The cursor moves to the minute digits, which will blink.
Scroll with [ ] and [ ] to the next minute, for example 45.
Confirm the minute setting with [ENTER].
The time has been set.
Note
The water heater takes no account of daylight saving.
Displaying water heater specifications
Note
This category is solely intended for the installation engineer and/or service and
maintenance engineer.
The corrected data is shown in the table of general and electrical data (see section 12.1).
39