System Exclusive Message - Roland GR-33 Owner's Manual

OMNI OFF
STATUS SECOND
BnH 7CH
n=MIDI Channel Number:
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
OMNI ON
STATUS SECOND
BnH
7DH 00H
n=MIDI Channel Number:
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
MONO
STATUS SECOND
BnH 7EH
n=MIDI Channel Number:
mm=Number of Individual Channels:
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
POLY
STATUS SECOND
BnH 7FH
n=MIDI Channel Number:
* Can be received only through the Basic channel.
* Will act the same as All Note Off.
System Realtime Message
Active Sensing
STATUS
FEH
* Having received this message, the GR-33 expects to receive information of any status of
data during about 420msec.If the GR-33 doesn't receive any message during that time, it
acts as if the All Note Off message is received, and returns to normal operation (will not
check interval of messages).

System Exclusive Message

STATUS DATA BYTE
F0H iiH ddH
F0H:
ii = ManufacturerID:
dd ......ee = Data:
F7H:
* For more details, refer to the page of "Roland Exclusive message" and Section 3 or after.
THIRD
00H
0H - FH (0 - 15) 0=ch.1 15=ch.16
THIRD
0H - FH (0 - 15) 0=ch.1 15=ch.16
THIRD
mmH
0H - FH (0 - 15) 0=ch.1 15=ch.16
00H - 10H (0 - 16)
THIRD
00H
0H - FH (0 - 15) 0=ch.1 15=ch.16
STATUS
eeH F7H
System Exclusive
41H (65)
00H - 7FH (0 - 127)
EOX (End Of Exclusive)
Chapter 11 Appendices
2. Transmitted Data
Channel voice messags
Note Off
STATUS SECOND
9nH kkH
n=MIDI channel Number:
kk=Note Number:
Note On
STATUS SECOND
9nH kkH
n=MIDI Channel Number:
kk=Note Number:
vv=Velocity:
Control Change
Bank Select
STATUS SECOND
BnH 00H
BnH 20H
n=MIDI Channel Number:
mm,ll=Bank Number:
Modulation
STATUS SECOND
BnH 01H
n=MIDI Channel Number:
vv=Modulation Depth:
Foot type
STATUS SECOND
BnH 04H
n=MIDI Channel Number:
vv=Control Value:
* When the Expression pedal is operated, the GR-33 sends this as the operation(Except
some noted setting of the "EXP PEDAL" paramater).
Data Entry
STATUS SECOND
BnH 06H
BnH 26H
n=MIDI Channel Number:
mm,ll=the value of the parameter specified by RPN
Volume
STATUS SECOND
BnH 07H
n=MIDI Channel Number:
vv=Volume:
* Transmitted the total volume fixed with expression pedal and GK-2A operation.
* Not transmitted when the VOLUME SEND SW of SYSTEM menu is OFF.
Pan
STATUS SECOND
BnH 0AH
n=MIDI Channel Number:
vv=Pan:
* Transmitted the action of the expression pedal when "EXP pedal" is set to "Pan
(Normal)".
THIRD
00H
0H - FH (0 - 15) 0=ch.1 15=ch.16
00H - 7FH (0 - 127)
THIRD
vvH
0H - FH (0 - 15) 0=ch.1 15=ch.16
00H - 7FH (0 - 127)
01H - 7FH (1 - 127)
THIRD
mmH
llH
0H - FH (0 - 15) 0=ch.1 15=ch.16
00H, 00H - 7FH, 7FH (bank1-bank16384)
THIRD
vvH
0H - FH (0 - 15) 0=ch.1 15=ch.16
00H - 7FH (0 - 127)
THIRD
vvH
0H - FH (0 - 15) 0=ch.1 15=ch.16
00H - 7FH (0 - 127)
THIRD
mmH
llH
0H - FH (0 - 15) 0=ch.1 15=ch.16
THIRD
vvH
0H - FH (0 - 15) 0=ch.1 15=ch.16
00H - 7FH (0 - 127)
THIRD
vvH
0H - FH (0 - 15) 0=ch.1 15=ch.16
00H - 40H - 7FH (0 - 64 - 127)
107