Table of Contents
Advertisement
1.2 Notes on possible personal injury
WARNING
!
Crush hazard arising from moving parts.
The regulator contains moving parts (actuator and plug stem), which can injure hands
or fingers if inserted into the valve.
Î Do not insert hands or fingers between the set point springs while the regulator is in
operation.
Î Before performing any work on the regulator, depressurize the plant. Disconnect or
shut off the external control line.
Risk of personal injury due to residual process medium in the valve.
While working on the valve, residual medium can flow out of the valve and, depending
on its properties, cause personal injury, e.g. (chemical) burns.
Î If possible, drain the process medium from all the plant sections affected and the
valve.
Î Wear protective clothing, safety gloves and eye protection.
Risk of burn injuries due to hot or cold components and pipelines.
Depending on the process medium, valve components and pipelines may get very hot
or cold and cause burn injuries.
Î Allow components and pipelines to cool down or warm up to the ambient tempera-
ture.
Î Wear protective clothing and safety gloves.
Damage to health relating to the REACH regulation.
If a SAMSON device contains a substance which is listed as being a substance of very
high concern on the candidate list of the REACH regulation, this circumstance is indicat-
ed on the SAMSON delivery note.
Î Information on safe use of the part affected u www.samsongroup.com/en/
about-samson/material-compliance/reach-regulation/.
EB 3131-1 EN
Safety instructions and measures
7
Advertisement
Table of Contents
