Table of Contents
Advertisement
Restore original monitor colors (COLOR RETURN)
After a number of years of operation the color brightness of your monitor may
decrease slowly. With this function you can reset the monitor colors to
manufacturer's default values. (Due to the natural aging process this function may
no longer work after a certain period of time.)
Prior to being able to use this function, the monitor must have been in standard
operation for at least 30 minutes (power indicator is green). If the monitor changes
over into energy saving mode, switch it back to normal mode and wait for
30 minutes. You may have to change the energy saving settings of your computer
in order to keep the monitor in standard operating setting for 30 minutes. If the
monitor is not ready, a respective message will appear.
Press the button
. While the original screen colors are being restored the
screen remains dark. This process takes about 2 seconds.
Open Help menu (HELP)
The most frequent questions and problems are covered here.
Calling the HELP window
?
Return to main menu
RETURN TO MAIN MENU
Recommended resolution:
RECOMMENDED RESOLUTION
1280 x 1024 at 85 Hz
Flickering:
FLICKER
Display of current refresh rate and reference to recommended
refresh rate >75 Hz
Thin horizontal line:
THIN HORIZONTAL LINE
There is no malfunction.
Picture distorted:
DISTORTED SHAPE
Setting the picture geometry (GEOMETRY)
Picture is blurred:
OUT OF FOCUS
Setting convergence (CONVERGENCE)
Discoloration:
DISCOLORATION
Check data cable
degauss monitor (MANUAL DEGAUSS)
Activating the factory settings
With the factory settings button on the front of the monitor, either the adjustment of a selected
function can be specifically reset to the factory setting, all settings for the current input signal can be
reset or all input signals reset.
Resetting a selected function to the factory setting
Select the function in the OSD menu to be reset.
Press the factory settings button
.
A26361-K616-Z100-1-5E19
All manuals and user guides at all-guidesbox.com
Color monitor 19T2
Color monitor 19T2
Resetting all settings for the current input signal
Press - with the OSD menu hidden - the factory settings button
All settings for the current input signal are reset.
i
Resetting all settings for all input signals
Press and hold down the factory settings button
least 2 seconds.
All settings including brightness and contrast are reset to the factory values.
Notes on ergonomic color adjustment
If you select colors for the display in your application programs, take note of the information below.
The primary colors blue and red on a dark background do not produce the minimum required
contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colors for characters and background and giving the primary colors full
modulation, you can obtain very suitable color combinations (see the following table):
Background
black
white
purple
blue
cyan
green
yellow
red
+
Color combination very suitable
-
Color combination not suitable because color locations are too close together, thin characters
are not identifiable or rigorous focusing is demanded of the human eye.
English - 15
16 - English
With this method those settings are not reset which are not influenced by a change in the
input signal (language and position of the OSD menu, color setting, locking of the buttons
for monitor adjustment).
- with the OSD menu hidden - for at
Characters
black
white
purple
blue
cyan
+
+
-
+
+
+
+
-
+
+
-
-
-
+
-
+
+
-
-
+
+
-
-
+
-
+
-
+
+
-
-
+
-
-
-
.
green
yellow
red
+
+
-
-
-
+
-
-
-
-
+
-
-
-
-
-
-
-
+
-
+
A26361-K616-Z100-1-5E19
Advertisement
Table of Contents
