Connecting The Card Adaptor; Precautions Concerning The Handling Of Compactflash Cards - Roland CG-8 Documentation Update

Revision of the Owner's Manual Due to Change in Design
The Card Adaptor for this product has been changed. Accordingly, the Owner's Manual should be revised as follows.
About the card adaptor

Connecting the card adaptor

fig.Card02.e.EPS
Correct >
Card adaptor
Inserting/removing a CompactFlash card
Inserting a CompactFlash card
fig.Card04.EPS
Correct >
Removing a CompactFlash card
When you insert a CompactFlash card, the button located beside the card slot will pop out.
When you press this button, the inserted CompactFlash card will pop out, allowing you to remove it.
fig.Card05.EPS
Correct >
About CompactFlash cards
Precautions concerning the handling of
CompactFlash cards
When removing
Grasp the card with your fingers and pull it straight out.
Never remove the card while loading, saving, or formatting is in progress. Also, you must never turn
off the power of the CG-8 or disconnect the power cord while loading, saving, or formatting is in
progress. Doing so may damage the CompactFlash card.
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
(P.18-19)
(P.20)
<Correct
<Correct
* 4 0 6 7 6 2 3 4 - 0 1 *