Table of Contents
Advertisement
Murphy Bed (if so equipped)
Your recreational vehicle may be equipped with a folding Murphy bed. When in the closed
position, the bed is stored in the wall allowing for more living space within the vehicle.
When you want to use the bed, the sofa folds flat and the bed can be pulled down over the
sofa into the sleeping position.
Stored Position
The slide out must be fully extended before putting the Murphy bed in the
sleeping position. The Murphy bed must be in the stored position before the
slide out can be moved to the in (travel) position. Failure to do so may result
in injury or property damage.
This label has been installed in your recreational ve-
hicle at the foot end of the Murphy bed. It should not
be removed.
Unfolding The Sofa
With the slideout fully extended, unfold the sofa into
the flat position.
Standing at the side of the sofa, grasp the
front of the seat cushion and the top of the
back cushion (A) (arrows).
Lift up on the seat cushion while pulling the top of the back cushion in toward the
seat. The seat and back will form a "V" shape. (B).
Pull the seat cushion out away from the front of the sofa into the flat position (C).
Maintenance Record
Sleeping Postion
Table of Contents
Section 12: Interior
139
Advertisement
Table of Contents
