Identification Label: Indoor Unit; Combining Units And Options; Possible Combinations Of Indoor Unit And Outdoor Unit; Possible Combinations Of Indoor Unit And Domestic Hot Water Tank - Daikin Altherma 3 H MT W Installer's Reference Manual

5.2.2 Identification label: Indoor unit

5.3 Combining units and options

5.3.1 Possible combinations of indoor unit and outdoor unit

5.3.2 Possible combinations of indoor unit and domestic hot water tank

EPRA08~12EAV3+W1 + ETBH/X12EF6V+9W
Daikin Altherma 3 H MT W
4P634885-1 – 2021.03
Location
Model identification
Example: E TB H 12 EA 6V
Code
E European model
TB Wall-mounted hydro-split unit with separated tank
H H=Heating only
X=Heating/cooling
12 Capacity class
EA Model series
6V Backup heater model
INFORMATION
Certain options may NOT be available in your country.
Indoor unit
ETBH/X12
Combination table
Indoor unit
EKHWS*D*
ETBH/X
(a)
When using a third-party tank, make sure it complies with the minimum requirements (see
"Third-party tank requirements" [
Third-party tank requirements
In case of a third-party tank, the tank shall adhere to the following requirements:
▪ The heat exchanger coil of the tank is ≥1.05 m² and ≤3.7 m².
▪ The tank thermistor must be located above the heat exchanger coil.
5
|
Description
Outdoor unit
EPRA08
O
Domestic hot water tank
EKHWSU*D*
O O
4
27]).
About the units and options
EPRA10 EPRA12
O
EKHWP Third-party
O
Installer reference guide
O
tank
(a)
O
27